Weldon Texture Finish is top quality water based paste to produce stunning textural effects followed by a final coat of Weldon Vinyl Emulsion or Weldon Plastic Emulsion.
Product Information
Drying Time: 2 to 3 hours
Coverage: 3 to 4 m²/Ltr/coat
Thinner: Water
Thinning: If needed 3 part texture 1 part water
Note: Use of gloves is recomended.
How to Use
- Surface area must be clean, dry and dust free. Fill surface with Weldon Wall Filler and allow to dry overnight.
- Surface should be rubbed down with abrasive paper and dust off.
- Properly seal surface from moisture and salty materials, better to apply one coat of Weldon Wall Primer.
- After preparation apply Weldon Texture Finish with roller of your choice to obtain desired textural effects.