Wall Putty
Weldon Wall Putty is water based high quality 100% Acrylic ready to use filler for all types of interior masonry surfaces such as brick work, plaster and cement renderings.
Product Information
Drying Time: 2 to 3 hours
Coverage: 5-6 m²/kg/coat
Application: Putty applicator
Thinner: Clean Water
Thinning: Ready to use
Cleaning: Clean all equipment with water
Preparation Required
For new or bare surfaces: Surface must be clean, dry and free from efflorescent salts.
For previously painted surfaces: Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff brushes and dust off. Treat any area affected by mould, lichens, algae or moss with bleach. After priming new surfaces with Weldon Primer fill the surface with Weldon Wall Putty. Allow the filler to dry for 2-3 hours and apply second coat of Weldon Wall Putty.
Weldon Wall Putty is not recommended for exterior use.