Betek Wall Putty
BETEK Wall Putty is a water based high quality 100% acrylic based ready to use filler for all types of interior masonry surfaces such as brick work, plaster and cement rendering.
Product Information
Drying Time: 2-3 hours between coats
Coverage: 5-6m²/kg/coat
Thinner: Clean Water
Thinning: Ready to use
Application: Brush
Cleaning: Clean all equipment with water.
Preparation Required
New or bare surface must be clean, dry and free from efflorescent salts remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff brushes and dust off. Treat any area affected by mould, lichens, algae or moss with bleach. After priming new surface with BETEK Primer, fill the surface with BETEK Filler Putty. Allow the filler to dry for 2-3 hrs and apply second coat of BETEK Wall Putty. BETEK Filler Putty can also be applied directly on new unpainted surface.