Weather Shield Putty
Weldon Weather Shield Putty (Water based) is a high quality acrylic based ready to use filler for all types of exterior masonry surfaces such as plaster and cement. It is brilliant white in colour, easy to apply and quick to fry. Its excellent filling properties give a smooth finish for topcoat application.
Weldon Weather Shield Putty has been specially developed for exterior surfaces.
Product Information
Drying Time: 2 to 3 hours
Coverage: 3-4 m²/kg/coat
Application: Putty applicator
Thinner: Clean Water
Thinning: Ready to use
No of coats: 1-2
Cleaning: Clean all equipment with water
Preparation Required
For new or bare surfaces: Surface must be clean, dry and free from efflorescent salts.
For previously painted surfaces: Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff brushes and dust off. Treat any area affected by mould, lichens, algae or moss with bleach. After priming new surfaces with Weldon Primer fill the surface with Weldon Weather Shield Putty. Allow the filler to dry for 2-3 hours and apply second coat. Third coat is not recommended for exterior surfaces. After drying scuff surface using abrasive paper and dust off. Do not leave the surface without a top coat for a longer time.