Betex Emulsion
BETEX Emulsion is an excellent quality emulsion with improved coverage. binding and finish. It is specially developed for all interior surfaces including brick work, plaster, concrete, wall boards, gypsum
etc.
Product Information
Drying Time: 2-3 hours depending upon temperature and humidity.
Coverage: 10-14m²/Liter/coat
Thinner: Clean Water
Thinning: Roller 20-30%, Brush 70-80%
Number of coats: 2-3
Application: Brush, Spray or Roller
Cleaning: Clean all equipment with water.
Preparation Required
New, bare, old or previously painted surfaces must be clean, dry and free from dust or wax. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surface completely and make the surface smooth. For large holes and cracks, use Plaster of Paris or White Cement Allow to dry. Apply BETEX wall Sealer in order to seal the surface from water and salts. Allow surface to dry completely. Then apply BETEX Wall Putty and allow to dry. Rub down the surface with abrasive paper and dust off. Now the surface will be smooth and ready for BETEX Emulsion to be applied. Stir the paint thoroughly before use.